Teco Motors

Teco Advantage Lite Motors

Aluminium Frame .12KW to 7.5KW
Teco Advantage Lite - is a range of high quality, totally enclosed fan cooled (TEFC), aluminium frame squirrel cage induction motors manufactured by TECO.

Features

Multi-mount frame construction to enable terminal box to be located in any position.
Lightweight gives user the benefit of utilising light supporting structures ideally suited to air movement, marine, material handling and a host of other industries.
Complete range of mounting including PAD mounting for air movement industry.
Brake Kit Ready, brakes ready to bolt on for low cost, quick delivery i.e. material handling applications.

Motor Construction

Stator frames are from a high-grade aluminium alloy extrusion producing an aesthetic pleasing appearance.
Endshields are pressure die cast aluminium alloy with a steel liner for the bearing housing for prolonged durability.
Castings are machined to tight tolerances for accurate alignment and minimum vibration.

Teco Aluminium TEFC Frame

Teco AEEB Motors

Cast Iron Frame 0.18KW to 185KW

Supply: 80-415 Volt 3 Phase 50HZ
Enclosure: TEFC IC0411
Efficiency: MEPS AS1359.5 2000<185KW
IP rating: 55
Thermistors / Overload: PTC thermistors 11KW and larger
Warranty: 2 years
240 Volt Delta, 415 Volt Star up to and including 4KW
415 Volt Delta 5.5KW and larger
For frame 63,71,90S,90L,112M
Finish colour TECO Grey, stainless steel nameplate, right hand side mounted terminal box (option to LHS)

Teco AEEB_Cast Iron

Teco Max-E2 Motors

High Efficiency 0.75KW to 185KW

Supply: 380-415 Volt 3 Phase 50HZ
Enclosure: TEFC IC0411
Efficiency: High Efficiency MEPS AS1359.5 2000
IP Rating: 55
Frame: Cast Iron
Thermistors / Overload: PTC thermistors 11KW and larger
Warranty: 2 years
240 Volt Delta, 415 Volt Star up to and including 4KW
415 Volt Delta 5.5KW and larger
Finish colour Light Grey Munsell N5, stainless steel nameplate, RHS mounted t-box (option to LHS)

Teco MAX-E2_High_Efficiency

Teco ASFB Open Drip Proof Motor

Cast Iron Frame 11Kw to 220Kw

Supply: 415/440 Volt 3 Phase 50HZ
Enclosure: Open ventilated drip proof
IP Rating: 22
Insulation: Class F
Rating: Continuous S1
Nameplate: Stainless Steel
Warranty: 2 years

Teco_ASFB_Open_Drip_Proof

Teco Hazardous Location Motors

0.18Kw to 300Kw EXE, EXN, DIP

Supply: 415/440 Volts 3 Phase 50HZ
Enclosure: TEFC
IP Rating: 55, 56, 66
Frame: Cast Iron
Nameplate: Stainless Steel
Thermistors: 11KW and above
Warranty: 2 years

Classification of Hazardous Areas
Area classification is a method of analysing and classifying the location where explosive atmospheres may exist, to permit the proper selection of electrical equipment to be installed in that area.

This is achieved as follows:
(A) The type of hazard
(B) The probability of an explosive atmosphere actually occurring is assessed
(C) The nature of the hazard, in particular the relevent properties of the hazardous material, are considered.

Once the area is classified, it is then possible to make a selection of appropriate equipment techniques.

Teco_Hazardous_Area_Motors